How to replace the rollers on my aluminium glass sliding door when the fixed panel is in the way of removing the sliding panel?
If the fixed panel of your aluminium glass sliding door is in the way of removing the sliding panel, you may need to remove the fixed panel in order to access the rollers. Here is a modified version of the step-by-step guide I provided earlier, with additional steps on how to remove the fixed panel:
1. Gather the necessary tools
You will need a screwdriver, a drill, a hammer, and a new set of rollers. Make sure to purchase rollers that are compatible with your sliding door.
2. Remove the fixed panel
First, you will need to remove the fixed panel in order to access the rollers on the sliding panel. To do this, use a screwdriver to remove any screws that are holding the fixed panel in place. You may also need to use a drill to remove any nails or staples that are holding the panel in place.
3. Remove the sliding panel
Once the fixed panel is removed, you can access the sliding panel and remove it from the tracks. To do this, lift the sliding panel slightly and slide it out of the tracks. You may need to use a screwdriver to remove any screws that are holding the panel in place.
4. Remove the old rollers
Once the sliding panel is removed, you will need to remove the old rollers. To do this, use a screwdriver to remove the screws that are holding the rollers in place. You may also need to use a drill to remove any nails or staples that are holding the rollers in place.
5. Install the new rollers
Once the old rollers are removed, you can install the new rollers. Simply slide the new rollers into place and use a hammer to tap them into place. Make sure the rollers are aligned properly and secure.
6. Reattach the sliding panel
Once the new rollers are installed, you can reattach the sliding panel to the tracks. Slide the panel back into the tracks and use a screwdriver to secure it in place.
7. Reattach the fixed panel
Once the sliding panel is in place, you can reattach the fixed panel. Simply slide the panel back into place and use a screwdriver to secure it in place. You may also need to use a drill to insert any nails or staples that were previously holding the panel in place.
8. Test the door
Finally, test the door to make sure it is operating smoothly. Open and close the door a few times to ensure it is moving smoothly along the tracks. If the door is still sticking or having difficulty moving, you may need to make additional adjustments or further lubricate the tracks.
By following these steps, you should be able to successfully replace the rollers on your aluminium glass sliding door, even when the fixed panel is in the way. It is important to regularly maintain and replace the rollers to ensure smooth operation of the door.