Maintaining an aluminium glass sliding door is important to ensure it continues operating smoothly and effectively.


Tighten loose screwsThese types of doors are often used as patio doors or as an entrance to a balcony and can provide a modern and stylish look to any home. However, like any other type of door, they require regular maintenance to keep them in good condition.

Here are some tips on how to maintain your aluminium glass sliding door:

1. Clean the tracks

The tracks of the sliding door can accumulate dirt, grime, and debris over time, which can cause the door to stick or become difficult to open and close. To clean the tracks, use a soft cloth or brush to remove any visible dirt or debris. You can also use a vacuum to remove any small particles that may be stuck in the tracks.

2. Lubricate the tracks

After cleaning the tracks, it is important to lubricate them to ensure the smooth operation of the sliding door. You can use a silicone-based lubricant, as it is less likely to attract dirt and debris than other lubricants. Simply apply a small amount of lubricant to the tracks, and use a cloth to spread it evenly.

3. Check the rollers

The rollers on the sliding door help it move smoothly along the tracks. If the rollers become worn or damaged, the door may become difficult to open and close. To check the rollers, lift the door slightly and see if it moves smoothly along the tracks. If the door is difficult to move, you may need to replace the rollers.

4. Tighten loose screws

Over time, screws on the door or its frame may become loose, which can cause the door to become misaligned or difficult to open and close. To tighten loose screws, use a screwdriver to tighten any loose screws. Make sure not to overtighten the screws, as this can strip the threads and cause further damage.

5. Inspect the weatherstripping

The weatherstripping on the sliding door helps to seal the gap between the door and the frame, which helps to keep drafts out and improve energy efficiency. Over time, the weatherstripping may become worn or damaged, allowing drafts to enter the home. To inspect the weatherstripping, close the door and check for any gaps around the edges. If you notice any gaps, you may need to replace the weatherstripping.

6. Check the lock

It is important to regularly check the lock on your sliding door to make sure it is secure. If the lock is not functioning properly, the door may not be secure and could be easily opened by an intruder.

Try opening and closing the door using the key to check the lock. If the lock is difficult to operate or does not seem secure, you may need to have it repaired or replaced.

By following these simple maintenance tips, you can help ensure that your aluminium glass sliding door continues to operate smoothly and effectively. Regular maintenance will not only keep your door looking its best, but it will also help to extend its lifespan and improve its performance.